Pairing with Swarnjal Wireless AquaRange Device

Follow these steps to successfully pair your Swaranjal Wireless AquaRange device:

Required Items:

Water bowl or bucket (filled with clean water)

Sensor wires (Red, Yellow, Blue, Green)

Transmitter and receiver units

Steps:

Prepare the Setup:

Power on both the transmitter and receiver units.

Do not use RO water; use regular tap water instead.

Prepare the Water Bowl:

Fill the water bowl or bucket with clean tap water.

Pair Red and Yellow Sensor Wires:

Submerge the Red and Yellow sensor wires in the water and wait for 10-15 seconds.

Wait for the receiver unit to show the yellow LED changing color, indicating successful pairing.

Test Additional Sensors:

Submerge the Blue and Green sensor wires.

The overflow alarm will trigger when all sensors (Red, Yellow, Blue, Green) are submerged in water.

The empty tank alarm will trigger when the Red wire is in the water or if no sensor wire is submerged.

Confirm Pairing Success:

Test all sensors and ensure the alarms trigger correctly for each sensor.

Troubleshooting:

If there are issues, reset (switch off and on the device again) and repeat the pairing process.

Notes:

Ensure all connections are correct and the water level remains stable.

Always use regular tap water and be patient during the pairing process.

By following these simple steps, you can successfully pair your Swaranjal Wireless AquaRange device.