Category: Self Resolve

If the red charging light on the back of the receiver is not showing while charging, follow these steps: Step 1: Check the Charging Accessories Try using another USB cable and adapter . Step 2: Test with Another Charger Use another USB charger to see if the light appears. Step 3: Further Assistance If the issue persists, contact our Customer Care for support.

If your transmitter light is not blinking, follow these steps to identify and resolve the issue: Step 1: Understand Blinking Patterns The transmitter light may blink fast or slow , depending on signal transmission. If the light is not blinking at all , the battery may be drained. Step 2: Check and Replace Batteries The transmitter uses 3 x AA batteries (same as a standard wall clock). Open the transmitter using a screwdriver and inspect the batteries. Step 3: Battery Replacement Options If...

If your device is not functioning within the range mentioned in its description, follow these steps to diagnose and resolve the issue: Step 1: Verify Device Specifications Check if the device you purchased meets your requirements. For example, Aquarange 10F/2KM means it works up to 10 floors indoors or 2 km in an open area . Step 2: Check Actual Working Range Test how far the device is working correctly. Environmental factors such as walls, interference, or metal structures can impact performance. Step...

Follow these steps to successfully pair your Swaranjal Wireless AquaRange device: Required Items: Water bowl or bucket (filled with clean water) Sensor wires (Red, Yellow, Blue, Green) Transmitter and receiver units Steps: Prepare the Setup: Power on both the transmitter and receiver units. Do not use RO water; use regular tap water instead. Prepare the Water Bowl: Fill the water bowl or bucket with clean tap water. Pair Red and Yellow Sensor Wires: Submerge the Red and Yellow sensor wires in the water...

If your receiver unit displays a violet and white (pink) light, it indicates that the transmitter unit is not paired with the receiver unit. Follow the steps below to diagnose and resolve the issue: Step 1: Check the Transmitter Unit Verify the Transmitter Light:Observe whether the transmitter is blinking. If the transmitter is not blinking , this indicates that the transmitter battery has been depleted. Replace the transmitter batteries following the guidance of our customer care team. Contact customer support as soon as...